CC2650 SensorTagΒΆ

../../_images/cc2650.jpg

The fledge-south-cc2650 is a plugin that connects using Bluetooth to a Texas Instruments CC2650 SensorTag. The SensorTag offers 10 sensors within a small, low powered package which may be read by this plugin and ingested into Fledge. These sensors include;

  • ambient light

  • magnetometer

  • humidity

  • pressure

  • accelerometer

  • gyroscope

  • object temperature

  • digital microphone

Note

The sensor requires that you have a Bluetooth low energy adapter available that supports at least BLE 4.0.

To create a south service with the CC2650 SensorTag

  • Click on South in the left hand menu bar

  • Select cc2650 from the plugin list

  • Name your service and click Next

cc2650_1

  • Configure the plugin

    • Bluetooth Address: The Bluetooth MAC address of the device

    • Asset Name Prefix: A prefix to add to the asset name

    • Shutdown Threshold: The time in seconds allowed for a shutdown operation to complete

    • Connection Timeout: The Bluetooth connection timeout to use when attempting to connect to the device

    • Temperature Sensor: A toggle to include the temperature data in the data ingested

    • Temperature Sensor Name: The data point name to assign the temperature data

    • Luminance Sensor: Toggle to control the inclusion of the ambient light data

    • Luminance Sensor Name: The data point name to use for the luminance data

    • Humidity Sensor: A toggle to include the humidity data

    • Humidity Sensor Name: The data point name to use for the humidity data

    • Pressure Sensor: A toggle to control the inclusion of pressure data

    • Pressure Sensor Name: The name to be used for the data point that will contain the atmospheric pressure data

    • Movement Sensor: A toggle that controls the inclusion of movement data gathered from the gyroscope, accelerometer and magnetometer

    • Gyroscope Sensor Name: The data point name to use for the gyroscope data

    • Accelerometer Sensor Name: The name of the data point that will record the accelerometer data

    • Magnetometer Sensor Name: The name to use for the magnetometer data

    • Battery Data: A toggle to control inclusion of the state of charge of the battery

    • Battery Sensor Name: The data point name for the battery charge percentage

  • Click Next

  • Enable the service and click on Done